AASHTO T 24021 Standard Method of Test for Effect of Heat and Air on a Moving Fi

AASHTO T 240-21 Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test).pdf文档页数:14文档大小:2.25MB文档格式:pdf Standard Method of Test for Effect of Heat and Air on a Moving Film of Aspha...

AASHTO T 240-21 Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test).pdf

文档页数:14文档大小:2.25MB文档格式:pdf

Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test) AASHTO Designation:T 240-211 Technically Revised:2021 Editorially Revised:2021 Technical Submittee:2b Liquid Asphalt ASTM Designation:D2872-04 AASHO American Association of State Highway and Transportation Officials 555 12th Street NW Suite 1000 Washington D.C.20004 Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test) AASHTO Designation:T 240-211 AASHIO Technically Revised:2021 Editorially Revised:2021 Technical Submittee:2b Liquid Asphalt ASTM Designation:D2872-04 1. SCOPE 1.1. This test is used to measure the effect of heat and air on a moving film of asphalt binder and to provide residue for additional testing.The effects of this treatment are determined from measurements of the properties of the asphalt binder before and after the test. 1.2. The values stated in SI units are to be regarded as the standard. 1.3. This standard may involve hazardous materials operations and equipment.This standard does not purport to address all of the safety concerns associated with its use.It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.4. The quality of the results produced by this standard are dependent on the petence of the personnel performing the procedure and the capability calibration and maintenance of the equipment used.Agencies that meet the criteria of R 18 are generally considered capable of petent and objective testing/sampling/inspection/etc.Users of this standard are cautioned that pliance with R 18 alone does not pletely assure reliable results.Reliable results depend on many factors;following the suggestions of R 18 or some similar acceptable guideline provides a means of evaluating and controlling some of those factors. 2. REFERENCED DOCU...

本文来自叛逆风云投稿,不代表文丁图集立场,如若转载,请注明出处:https://www.2b34.com/blog/178010.html

打赏 微信扫一扫 微信扫一扫 支付宝扫一扫 支付宝扫一扫
() 0
上一篇 06-16
下一篇 06-16

相关推荐

评论列表

联系我们

在线咨询: QQ交谈

邮件:admin@qq.com

工作时间:周一至周五,9:30-18:30,节假日休息

关注微信