HP Proliant系列服务器 配置阵列卡过程.doc
文档页数：9文档大小：136.5KB文档格式：doc1.从自检信息中可以判断出，机器加的阵列卡为SmartArray 642阵列卡一块.
ProLiant Systen BI0S - P28 (09/15/2004) Copyright 19822004 Hevlett-Packard Developaent GroupL.P. Processor 1 initialized at 2.40 GHz/400 MHz(512 Kbyte L2) Advanced Memory Protection Mode: Advanced ECc Support o -a Integrated Lights-0ut Advanced 1.62 Aug 05 2004 10.0.1.104 Slot 2 HP Smnrt Arrg 642 Controller (64MBv2.34) 1785-Slot 2 Drive Array Mot Configured usdxaoede rpoq oosuatsod Drive positions appear to have been changed. Then turn system pover 0FF and nove drives to their original positions. pressto run the option RoH Configuration for Arrays Utility Pressto skip configuration and continue 2.上面提示信息说明，进入阵列卡的配置程序需要按F8进入阵列卡的配置程序.
可以看到机器阵列卡的 配置程序有4个初始选项： Create Logical Drive 创建阵列 View Logical Driver查看阵列 Delete Logical Driver 删除阵列 Select as Boot Controller 将阵列卡设置为机器的第一个引导设备 注意：最后一个选项，将阵列卡设置为机器的第一个引导设备.
这样设置后，重新启动机器，就会没有该选 项.
Option Ron Configuration for Arrays -version 2.44 Copyright 2003 Heulett-Packard Development CompanyL.P. Controller: HP Snart Array 642slot 2 Direct-Attached Storage Create Logical Drive Hain Menu Delete Logical Drive Vieu Logical Drive Select as Boot Controllerto create a nev logieal drive Note: For nore configuration options use the HP Array Configuration Utilityto select main menu option;to exit 3.选择“Select as Boot Controller" 出现红色的警告信息.
选择此选项，服务器的第一个引导设备是阵 列卡(SmartArray 642)，按“F8*进行确认.
Option Ron Configuration for Array=version 2.44 Copyright 2003 Heulett-Packard Development Company. L.P. Controller: HP Smart krray 642slot 2 Direct-Attached Storage Varning The current boot controller uill be replaced by: slot 2 : HP Smart Array 642 Pressto cancel Pressto set boot controllerto set the boot controller Note: For more configuration options use the HP Array Configuration Ueility 4.按完"F8"，确认之后，提示，确认改变，必须重新引导服务器，改变才可以生效.
Option Ron Configuration for Arrays version 2.44 Copyright 2003 Heulett-Packard Development CompanyL.P. Controller: HP Snart krray 64zslot 2 Direct-attached Storage Boot Order Changed The boot ordering has changed. The server ust be rebooted before the changes will take effect. Pressto return to the main menu.to return to the main nanu Note: For more configuration options use Utility 5.按“ESC"之后，返回到主界面，现在看到三个选项了.
Option Rom Configuration for Arraysversion Copyright zoo3 Hewlett-Packard Development CompanyL.P. 2.44 Direct-Attached Storage Controller: Hp Snart Array 642slot 2 Create Logical Drive Hain Menu Vieu Logical Drive Delete Logical Driveto create a nev logical drive Hote: For more configuration options use the Hp Array Configuration Utilityto select main nenu option;to ezit 6.进入"CreateLogicalDrive”的界面，可以看到4部分的信息 选项 说明 Available Physical Drives 列出来连接在此阵列卡上的硬盘.
图示的硬盘在SCSIPORT2
(SCSIB)ID为0，硬盘的容量为36.4GB. Raid Configurations 有3种选择RAID5，RAID1（10)，RAID0.图示的机器带 一个硬盘，默认为RAID0. Spare 把所选择的硬盘作为热备的硬盘 Maximum Boot partition 最大引导分区的设置，可以有两个选项，Disable（4G maximum) 默认和 Enable (8G maxiumu). Dption Ron Configuration for Arraysversion 2.44 Copyright 2003 Heulett-Pachard Development CospanyL.P. Direct-Attached Storage Controller: HP Snart krray 642slot 2 [X]SCSI Port Available Physical Drives Raid Configurations 2 IDO CONIPAQ 36.4CB (OT)TGIV（] [1DAID 5 [X] PAID0 IIUne one drive ns spane Spare Haximu Boot particion= [X] Disable (4GB marimum) 【1Enable (8CB naxinus) Note: For more configuration options use the Hp Array Configuration Utility 7.按回车进行确认，提示已经创建一个RAID0的阵列，逻辑盘的大小为33.9GB，按F8进行保存即 可.
Option Ron Configuration for Arraysversion 2.44 Copyright 2003 Heulett-Packard Development Company. L.P. Controller: HP Snart Array 642slot 2 Direct-Attached Storage You have seleeted a logieal drive with a cotal data size of 33.9 GB nd RAID 0 fault tolermmce. Press <fes to save che contiguration Pressto cancelto cancelto save the configuration Note: For nore configuration 8.按"F8"进行保存.
Option Rom Configuration for Arraysversion Copyright 2003 Heulett-Packard Development CompanyL.P. 2.44 Direet-Attached Storage Controller: Hp Smart Array 64zslot 2 Saving configuration.. Note: For nore configuration options use the HP Array Configuration Utility 9.提示配置已经保存，按回车.
本文来自冰蓝水蜜桃投稿，不代表文丁图集立场，如若转载，请注明出处：https://www.2b34.com/blog/200900.html
微信扫一扫 
